Cationic polyacrylamide
The product is polymerized from cationic monomer and acrylamide, by continuous polymerization process. It is a kind of high molecule, high soluble and linear eupolymer, with advantage of stable quality and wide usage.
Applications:
Urban greening:The sedimentation and defecation of city raw water and sewage ; Municipal sewage sludge's concentration and dehydration.
Sewage treatment: Treat waste water in plans of paper, dying, electroplating, leather, foodstuff, metallurgy, petrochemical, sugar, mine process and so on.
Industrial production: In paper making, it can be as additives of dry strength agent and retention aid, to lower cost and improve quality and increase the output.
Oilfield applications: In oil-drilling field, it can be as clay stabilizer, acidification fracture thickener.
Specifications:
| Appearance | Solid content(%) | Molecular weight(million) | Hydrolysis degree(%) | Dissolve time(min) |
| White granule | ≥90 | 6-15 | Low/medium/high | ≤60 |
25kg/bag, 18 tons in one 20 feet container
Product Description:
HRFLOC Cationic polyacrylamide CPAM is a water-soluble high polymer with good flocculation ability. It can reduce the friction resistance between liquid. It is not soluble in most organic solvent.
Application:
This product is mainly used for sludge dewatering and decrease the rate of water contect of sludge. It can be used to treat industrial wastewater and domesctic sewage.
Specifications:
lonic Form: Cationic type
Appearance: White fine-sand powder
Solid Content:≥90 %
Molecular Weight:6 million - 10 million
lonicity:5%-80 %
Dissolving time:45 min-90 min
Advantages:
1,Economical and achieve good effects at low dosage.
2,Significantly improve the sludge production efficiency and reduce the moisture content of sludge cake
3,lncrease the settling rate of suspended solids during the solid-liquid separation in sewage treatment process.
4,Highly effective in a wide PH range(2-9), it is capable of treating waste water and sludge under weak acidic condition.
| Specification | Anionic Polyacrylamide | Cationic Polyacrylamide | Nonionic Polyacrylamide |
| Appearance | off white granular powder |
| Molecular Weight | 6-18 million | 6-12 million | 2-12 million |
| Charge Density | 5%-50% | 5%-80% | 0%-5% |
| Solid Content | 89%Min |
| Recommended Working Concentration | 0.1%-0.5% |
| Shelf Life | 2 years with proper storage |